Who monitors the Skooter Blog know my classic consoles game (Mega Drive, Super Nintendo, Playstation One, and Atari 2600), in LCD Full HD TV through the Frame Master. And eventually I do catch those matches using the Elgato - Game Capture HD60.
Despite the Elgato - Game Capture HD60 have a HDMI output passthrough, She has some problems I've mentioned in the article on her, including artifacts in the image when the ZBOX is not connected and the software Elgato Open. Because of this I've been using the Matriz HDMI 1080p LINK-MI LM-MX03 – 4 Articles / 2 Outputs, connecting the Frame Master in one of the entries, the receiver Yamaha RX-A830 in an exit and the Elgato - Game Capture HD60 in another way, so that the HDMI Matrix was being used as splitter HDMI.
A HDMI Matrix meets well the role of splitter HDMI in this scenario, but eventually a change in configuration Frame Master does the HDMI Matrix altenar entry, requiring me to go to her to return to the correct input. Apparently the configuration change plays briefly some strange signal on the input Matrix and she is confused. I didn't find any solution to this.
To end the problem of time, and also to help stay under-utilizing the Matrix, I decided to purchase HDMI Splitter 1×2 1.3b 1080 p 3D (New 1080 p 2 Ports HDMI Splitter HDMI Splitter 3D 1.3 b I Plug 1 x 2 HDMI Splitter 5V Power Supply Is HDTV Switcher) in AliExpress with the store Fancy Yuki's Shop.
The HDMI Splitter 1×2 is simple, small, cheap and well its role. All it took was to connect the Frame Master in single entry, and the receiver Yamaha RX-A830 and to Elgato - Game Capture HD60 in each of the outputs. The image and the sound of Frame Master then it flows perfectly to the Yamaha and to Elgato.
The power supply uses the European standard, ungrounded, that is fully compatible with the Brazilian standard. The cord is short, so that I could not get the source get to the Chinese line filter with individual switches, that was my preference because I could connect the HDMI Splitter 1×2 only when I play, saving energy, as had been doing with the HDMI Matrix. I ended up calling him in another filter, so he gets all the time connected. But I did a test with the Kill-a-Watt EZ and the consumption of HDMI Splitter 1×2 is so low that not even detected, getting always zero. So I stayed quiet as to keep it on all the time, even when the Frame Master is not being used.
The fitting of the HDMI plugs in HDMI Splitter 1×2 is tight, so I ended up fitting in half the first time thinking he already had come to the end, but after I made the correct connection and I was satisfied that there is no risk of accidentally undock. There is a blue LED next to each HDMI output. They light up when the corresponding output is working. There is also a blue LED for input, that lights up when there is sign on it. Finally there is a red LED next to the power supply input, that lights up when the device is connected.
Check out some photos from the HDMI Splitter 1×2 1.3b 1080 p 3D:
And the purchase summary table:
|Product Name:||HDMI Splitter 1×2 1.3b 1080 p 3D|
|Name Original:||New 1080 p 2 Ports HDMI Splitter HDMI Splitter 3D 1.3 b I Plug 1 x 2 HDMI Splitter 5V Power Supply Is HDTV Switcher|
|Store:||AliExpress | Store: Fancy Yuki's Shop.|
|Current value:||US$ 10,75|
|Payment Method:||Credit Card Visa International|
|Shipping Type:||Seller’s Shipping Method|
|Package Home Country:||China|
|Time in Transit:||50 days|
|Declared content:||Microprocessor 1095679983081 ZC262000 402#*1|
|Type Marked Content:||Other|
|Declared Value:||US$ 9,30|
And I'm ending here the article on HDMI Splitter 1×2 1.3b 1080 p 3D, with a positive recommendation for the product and for the store Fancy Yuki's Shop. Share this article with your friends if you liked ;). If you also want to shop in AliExpress, directly from Hong Kong, click here and good shopping.