These Socket adapters 4 outputs of 3 pins (2P + T) 10A It has a distinctive shape and are quite useful in some situations as taken behind furniture or plugs/sources that cover the other outputs.
The first situation is quite common, an outlet gets behind some furniture and to use the mobile needs to be far enough from the wall, to make room for the plug that is connected to the power outlet. This always happens with that taken which stands behind the nightstand or the rack, is not even?
Because the Socket adapter with 4 outputs of 3 pins (2P + T) 10A solves this problem. He gets a little with respect to the wall, and every two 4 outputs are on the sides, so that conventional plugs will not be bulging with the wall. That way you can keep furniture almost against the wall without any major problems and without risk of crushing the wire on the plug and cut it.
Another situation in which the Socket adapter with 4 outputs of 3 pins (2P + T) 10A can be useful is that where we have sources that block the other taken, When these are arranged in parallel, on each other, What is common in most of the adapters. But Socket adapter with 4 outputs of 3 pins (2P + T) 10A It has exits at the sides, two on each side of the adapter and side by side instead of on top of each other, so that the sources and adapters that insist on capping the other outlets will be able to accommodate without getting in the way.
As 4 outputs from the Socket adapter with 4 outputs of 3 pins (2P + T) 10A are of 3 pins, in other words, the ground PIN is present. All are in the Brazilian standard. The mark of the adapter is “Atelier Mecatool” and it counts with the Inmetro seal.
Check out some photos of Socket adapters 4 outputs of 3 pins (2P + T) 10A: