As I mentioned briefly in the article on the Decoder and HDMI to HDMI Audio Extractor, SPDIF and analog 5.1, and also in the article on the Smart TV Panasonic Viera TC-40 "-40DS600B, that Smart TV Panasonic, that is in my home office, is not able to decode Dolby Digital, as transmitted by Sky on some channels, Unlike the Sony TVs.
So, to have sound on Sky I need configure the decoder to transmit only PCM audio. But it turns out the point where it is Smart TV Panasonic is a slave, made with a HDBaseT HDMI Extender Lenkeng LKV375 by Single twisted pair. The main point is connected on my receiver Yamaha RX-A830, so I need the Sky decoder transmit Dolby Digital audio so I can take advantage of the audio 5.1 in the channels that offer, When I'm watching the bottom line.
The first solution I imagined was with the Decoder and HDMI to HDMI Audio Extractor, SPDIF and analog 5.1, but she failed on account of this equipment doesn't work as it should. My second option was to use a receiver that was no use here, a kit HT-in-a-box Onkyo HT-S5400. This receiver had problems in HDMI ports in the past, so that was replaced first by Yamaha RX-V675 and then by Yamaha RX-A830. But this kit boxes continued to be used in my living room.
After a few years, solve repair Onkyo receiver. He was no use, until I decided to connect it to Smart TV Panasonic. With a little workaround until you can do it only decode audio and send it to the TV itself in PCM, but it was a complicated setup needed to be redone every time. I decided to use some little boxes of an old kit Creative Inspire 5200, I had also stopped by here. I know he is good thing, but I figured it couldn't be any worse than the sound of his own TV. I used the little boxes of it directly in the receiver and the subwoofer his (you have the integrated amplifier) ended up getting like a subwoofer active.
Where do the Transparent Adhesive Hooks Small in this story? They would serve just to hang the little boxes of the Creative Inspire 5200 on the walls that I needed to stick them. As they support up to 1 kg and the boxes are quite light, probably would work. Note that I had used the version that supports up 3 Kg of the same type of hook to hang posters canvas and they are in place for over a year.
But the fact is that the sound of the little boxes of Creative Inspire 5200 on the Onkyo receiver managed to be worse than the sound of his own TV. He's not so bad when the boxes are in your own amp, so maybe the impedance not case or something like that. The Onkyo it is 6 ohms, but could not find info on the Creative Inspire 5200.
I ended up giving up on using the Creative Inspire 5200 that way, and I ended up selling it. Thought about buying a set of small boxes, like JBL Cinema 610, with sizes well suited for an Office. But the high cost made me see more advantage to upgrade in my Office and return to Onkyo their respective boxes.
I will speak of the boxes that I have acquired for my room in future articles, but the fact is that the Onkyo with the original boxes looks great with the Smart TV Panasonic Viera 40 ″, even with the boxes had not been optimally positioned. The problem of decoding Dolby Digital on the TV home office It's definitely solved.
But the Transparent Adhesive Hooks Small ran out of use? For a few 40 days Yes, but at least one of them ended up being used as we'll see until the end of the article.
Unboxing and impressions
The Transparent Adhesive Hooks Small They were acquired in Submarino the cost of R $ 9,90 for color chart. By being transparent are quiet enough, even when what is hanging not cover. The adhesive is white, so that just goes unnoticed in clear or white walls. Could have used an adhesive transparent also to get better.
Check out some photos of Transparent Adhesive Hooks Small:
Using a Transparent Adhesive Hook
As I explained earlier, the original use I had for the Transparent Adhesive Hooks Small just not finalized and they were stored, but a few days ago came an unexpected use for one of them. To hang a wreath on the door without using nails, I ended up using one of the Transparent Adhesive Hooks Small.
The adhesive is strong and supports the Garland quietly, but the fact is, she ended up falling with hook and everything because the varnish the door taken off and stuck on the sticker :(. So stay alert to not use this hook on surfaces that can take off or painted with Paints/varnishes they can take off.
But do not give up. Removed completely the original adhesive and in his place put a piece of Double Sided Tape Fixed Acrylic Mass Pro Adelbras, that is also a strong adhesive, transparent, and that can be removed easily when you no longer need be used. Like there was no varnish at the point where it was applied, the new adhesive remains firm and strong holding hook for wooden door.
The Transparent Adhesive Hooks Small are good substitutes for nails and screws, Since used on smooth surfaces and that don't take off. It is also important to take some care, How to clean well the surface where the hook will be pasted, leave the rest for the recommended time (1 time) before hanging anything on the hook, and respect the limit of weight of the hook acquired. Por fim, It's good to remember that the patch is made for permanent settlement, so can leave residues or damage on the surface if it is removed.