In this article I talk about 2 Batteries CSB HR 1234W F2 12VDC 9Ah 34W long life 8 years, I've acquired to replace the original battery that came with my Ups APC UPS Backup Pro 1000.
My Ups APC UPS Backup Pro 1000 was acquired in mid- 2013. At that time the APC still sold in Brazil the same ups that sells in the U.S.. Such UPS has USB interface and are recognized by Windows without the need for installation of drivers. Thus, When there is no power and the battery is ending, Windows can hibernate automatically, avoiding data loss.
You can also install the PowerChute Personal Edition software to access settings and additional features, including the sensitivity of the ups to the network anomalies, minimum and maximum voltages from which the unit will intervene, energy consumption meter, among other.
This Ups APC UPS Backup Pro 1000 is connected to my network equipment: router, switch, NAS, etc. The USB interface is connected to my Synology America DiskStation 2-Bay Diskless Network Attached Storage (DS214play) and he also recognizes the unit immediately, monitoring the battery charge and turning itself off automatically when there is no power and the load is low.
Unfortunately the APC bought the Microsol and then discontinued the Ups APC UPS Backup Pro 1000 no Brasil. Now the line of inexpensive uninterruptible power supplies, called short break, Unit interactive, unit of square wave, etc., is composed only by products that were of Microsol. And this is bad!
Some APC uninterruptible power supplies-Microsol has USB interface, but are not detected by Windows and are not supported by the Powerchute. Instead, What APC offers is a hulking software, made in Java, and that is not running as a service.
So, If the PC does not have logged in user, you will lose data. If you have a user logged in, often some of the processor cores is with maximum load for the software. Bad! Bad! Bad!
Therewith, I'm very happy that my Ups APC UPS Backup Pro 1000 is still working perfectly. Because I honestly don't know what to buy today if he shows signs of a problem.
Batteries CSB HR 1234W F2 12VDC 9Ah 34W long life 8 years
After more than 3 and a half years of use, the original batteries Ups APC UPS Backup Pro 1000 died. LCD Panel it was possible to see a picture of the empty battery and flashing. Any power outage and he hung up immediately.
I decided to then purchase new batteries for it. My experience with replacement batteries shows that the vast majority of them don't last even half of that last the APC documents. For example, I had bad experience with Ajax batteries, lasting less than a year.
As CSB Batteries I have never used. But it caught my attention the fact that they have specified batteries to last 5 years and up 8 years, as is the case of Batteries CSB HR 1234W F2 12VDC 9Ah 34W long life 8 years. As the warranty is only 1 year, You can't put too much trust in this specification, But if it lasts at least half of that will be of great size.
As Batteries CSB HR 1234W F2 12VDC 9Ah 34W long life 8 years are made in Viet Nam and apparently the factory has some ISO certifications: ISO 9001 and ISO 14001, What anything ensures product quality, but it seems a reasonable indicator that are the least serious.
As Batteries CSB HR 1234W F2 12VDC 9Ah 34W long life 8 years came with a seal of the NHS, It also manufactures ups and probably is the importer of these CSB battery.
Another differentiator is that they are 9Ah batteries instead of 7, 2Ah which is the most common. That theoretically should provide a slightly larger autonomy.
Changing the batteries Ups APC UPS Backup Pro 1000
Another advantage of Ups APC UPS Backup Pro 1000, absent in APC uninterruptible power supplies-Microsol, do they allow hot swap. So I didn't even have to stop my network to make battery replacement.
Just removed the battery cover and pulled the two, that are connected by a piece of plastic with wiring, whose function is to connect the batteries in series and the connector that fits on the UPS. The batteries and get stuck for two stickers.
What I did was remove the two bumper stickers, replace the two batteries, Remaking the connections, and finally paste the stickers. Fortunately the original glue is strong and I didn't have to put any additional glue. But after a few changes it may be necessary to supplement with duct tape or something like that.
Notice that in civilization APC already sells replacement batteries in pairs, already connected in series with the plastic piece and the stickers, as can be seen also on Amazon. But here in the third world has never found APC batteries for sale. Once I got in touch with an authorized service center and I had to hear that they do not sell batteries and just make the trade themselves. I would have to send the unit, and the cost was absurd.
After installing the batteries in series, connected-the unit, still attached, and he immediately recognized the new batteries and proceeded to load them.
I know that through the Powechute it is possible to inform the unit he is with new batteries, so that he make the proper calibration. But, as my Ups APC UPS Backup Pro 1000 is connected to the Synology America DiskStation 2-Bay Diskless Network Attached Storage (DS214play), There's no way to make that warning. There is no such functionality in the.
The side effect of this is that the unit is showing an estimated load 0 minutes, and sometimes shows 1 minute. If you lack power, the DS214play already starts shutdown immediately, However the other equipment still working.
There seems to be a manual process to do the calibration, but he is to leave the unit unplugged until the battery runs out. How will this end up happening of course sooner or later, I let it go. In fact even turned off the unit since I installed new batteries in December, and there go almost two months. In that time happened a few power outages, but all were fast and they didn't take more than a minute.
Then, for while the Ups APC UPS Backup Pro 1000 still loaded, but functional. The battery charge appears as full and the left display to show that the batteries should be replaced.
And for those who are curious, and at least I was, the APC's batteries are manufactured by Kung Long Batteries, also in Viet Nam, as was evident after the removal of stickers.
It's too early to assess the 2 Batteries CSB HR 1234W F2 12VDC 9Ah 34W long life 8 years. By the time they are fulfilling your role, but it's been only 2 months of the 8 years that they supposedly last. If you arrived at this article a long time after the publication, leave a comment that you respond if they are still good.