Switch Mouse repair Logitech G9x

In this article I talk about the repair of the switch of the left button of a Mouse Logitech G9x, I acquired in 2012 and that went on to fail in the left button after 5 years of use.

Spare items used in this repair were the following:

  1. Micro Switch Omron D2FC-F-7N (10M)
  2. Mouse Skates for Logitech G9/G9X

Note que os Mouse Skates are needed, as for removing the screws of the mouse you need to remove them. I don't like it when manufacturers make it, but unfortunately it is common to put screws under rubber feet.

In addition to the replacement items, I made use of the following tools to open and close the mouse, remove the old switch weld and solder the new switch:

  1. Chave Philips
  2. Soldering station and Hot air Rework Yaxun 702 110v
  3. Desolder
  4. Tin
  5. Colorless varnish Isotec Insulation Spray 300 ml Implastec

Check out some pictures of the work and results:

Logitech G9x Mouse Board, before the repair.

Logitech G9x Mouse Board, before the repair.

Logitech G9x Mouse Board, before the repair, with the switch of the left button detonated.

Logitech G9x Mouse Board, before the repair, with the switch of the left button detonated.

Are 3 pins to desolder and remove the faulty switch.

Are 3 pins to desolder and remove the faulty switch.

The Logitech G9x, free already defective switch.

The Logitech G9x, free already defective switch.

Logitech G9x mouse Board, with the new switch already soldier.

Logitech G9x mouse Board, with the new switch already soldier.

Logitech G9x mouse Board, with the new switch already soldier.

Logitech G9x mouse Board, with the new switch already soldier.

Time to assemble the Logitech G9x again.

Time to assemble the Logitech G9x again.

All going well, the Logitech G9x is already almost ready.

All going well, the Logitech G9x is already almost ready.

Logitech G9x already assembled with the new switch.

Logitech G9x already assembled with the new switch.

Now a good cleaning before you paste the new feet skateboards).

Now a good cleaning before you paste the new feet skateboards).

Now a good cleaning before you paste the new feet skateboards).

Now a good cleaning before you paste the new feet skateboards).

And now the Logitech G9x ready, with the new skates already glued.

And now the Logitech G9x ready, with the new skates already glued.

And the Logitech G9x in operation, with the new switch and the new skates. Will tough other 5 years?

And the Logitech G9x in operation, with the new switch and the new skates. Will tough other 5 years?

The switch for the Logitech G9x removed defective and one of the new switches.

The switch for the Logitech G9x removed defective and one of the new switches.

Permanent link to this article: https://www.skooterblog.com/2018/09/28/reparo-de-switch-do-mouse-logitech-g9x/

Leave a comment

Avatar
  Sign up
Notify about
×