[Review] BSIDE ESR02 Pro – Transistors Tester, Capacitors, etc. – AliExpress

In this article I talk about the BSIDE ESR02 Pro, a device to test transistors, capacitors, diodes, and other electronic components, both PTH as SMD. He was acquired on AliExpress, shop BSIDE TRADE HONGKONG CO., LTD Store.

Motivation

Recently I wrote an article talking about the repair of my cellar EasyCooler 8 Model bottles 4092640045. I ended up changing all electrolytic capacitors, because there was no way to test them properly only with the multimeter. At least not in a practical way.

I ended up deciding to use part of the money that I saved with the repair of the cellar, or with the purchase of a new wine cellar, to invest in BSIDE ESR02 Pro. In the case of capacitors, He not only shows the capacitance, but also the E.S. R. (Equivalent Series Resistance), What helps in the task of finding defective capacitors.

Choice of BSIDE ESR02 Pro

There are a lot of similar equipment to BSIDE ESR02 Pro there on AliExpress. Some are cheap, but use a label naked, without a proper case. The BSIDE ESR02 Pro is more expensive, but it's much more completinho.

The BSIDE ESR02 Pro tests both PTH and SMD components. Has contacts with a resistance to discharge capacitors before testing them. And has terminals for connecting probes, enabling test components without removes them from the plate.

Here it is a note: I'm no expert in electronics, but I believe that depending on the direct test circuit on the Board can indicate incorrect values. But anyway it's good to have probes to facilitate some tests.

Unboxing and Tests

The BSIDE ESR02 Pro It came in an envelope, with your little box wrapped with bubble wrap, arriving in perfect condition. The box highlights features of the equipment and the technical data of the same. Inside the equipment and instruction manual in English, that is quite useful.

Package with the BSIDE ESR02 Pro.

Package with the BSIDE ESR02 Pro.

Unpacking the BSIDE ESR02 Pro.

Unpacking the BSIDE ESR02 Pro.

BSIDE ESR02 Pro, on its packaging.

BSIDE ESR02 Pro, on its packaging.

BSIDE ESR02 Pro, on its packaging.

BSIDE ESR02 Pro, on its packaging.

BSIDE ESR02 Pro, on its packaging.

BSIDE ESR02 Pro, on its packaging.

BSIDE ESR02 instruction manual Pro.

BSIDE ESR02 instruction manual Pro.

BSIDE ESR02 instruction manual Pro.

BSIDE ESR02 instruction manual Pro.

At the top of the BSIDE ESR02 Pro We have the LCD display, the two operating buttons, the terminals for SMD components, the terminals for unloading, the terminals for PTH components test, and terminals for use of probes.

Top of the BSIDE ESR02 Pro.

Top of the BSIDE ESR02 Pro.

At the bottom we have the battery compartment. It works with a 9V battery (not included). I'm using a rechargeable lithium ion battery of Soshin, no problem.

At the bottom there is also a table with typical values of ESR for electrolytic capacitors as the capacitance and voltage.

The bottom of the BSIDE ESR02 Pro.

The bottom of the BSIDE ESR02 Pro.

On the back of the BSIDE ESR02 Pro We have a DC input 9 the 12V, where we can connect an adapter to use it with electrical energy.

The backside of the BSIDE ESR02 Pro.

The backside of the BSIDE ESR02 Pro.

Then did some tests with some capacitors and transistors in BSIDE ESR02 Pro, that can be seen in the pictures below.

BSIDE ESR02 Pro, operation.

BSIDE ESR02 Pro, operation.

Testing a capacitor on the BSIDE ESR02 Pro.

Testing a capacitor on the BSIDE ESR02 Pro.

Testing a transistor on the BSIDE ESR02 Pro.

Testing a transistor on the BSIDE ESR02 Pro.

Testing a transistor on the BSIDE ESR02 Pro.

Testing a transistor on the BSIDE ESR02 Pro.

Also check out the video with unboxing and the tests of BSIDE ESR02 Pro:

Tracing

These are the trace information obtained on the website of the AliExpress:

  • 2018.07.11 16:00 (GMT-7): Delivery successful
  • 2018.07.11 11:48 (GMT-7): Shipment at local distribution center
  • 2018.07.05 17:40 (GMT-7): Cleared customs
  • 2018.07.04 08:21 (GMT-7): Started customs clearance process
  • 2018.07.03 08:31 (GMT-7): Shipment with local shipping company
  • 2018.06.15 20:00 (GMT-7): Departed country of origin
  • 2018.06.13 11:28 (GMT-7): Shipment accepted by airline
  • 2018.06.12 08:01 (GMT-7): Shipment left country of origin warehouse
  • 2018.06.11 22:51 (GMT-7): Shipment at country of origin warehouse
  • 2018.06.11 22:21 (GMT-7): Shipment dispatched

The package was sent with a tracking code LP + 15 digits. Through it I could get the code LB + 9 digits + IF in the Cainiao, that showed the following information:

  1. [REMOVED / SP]Object delivered to destinatário2018-07-11 16:00:00
  2. [REMOVED / SP]Out for delivery to the object destinatário2018-07-11 11:48:00
  3. [INDAIATUBA / SP]Object forwarded,Treatment Unit in INDAIATUBA / SP for distribution in Unit REMOVED / SP2018-07-10 13:03:00
  4. [CAJAMAR / SP]Object forwarded,Treatment Unit in CAJAMAR / SP for Treatment Unit in INDAIATUBA / SP2018-07-07 14:00:00
  5. [CURITIBA / PR]Object forwarded,Distribution Unit in CURITIBA / PR for treatment plant in CAJAMAR / SP2018-07-05 17:42:00
  6. Import clearance success2018-07-05 17:40:00
  7. [CURITIBA / PR]Customs supervision finalizada2018-07-05 17:40:00
  8. Import clearance start2018-07-04 08:21:00
  9. [CURITIBA / PR]Object received by the post Office of the Brasil2018-07-04 08:20:00
  10. Arrive at destination country2018-07-03 08:31:00

Por fim, These are the information obtained on the site of the station:

11/07/2018
16:00
Delivered to the addressee object
11/07/2018
11:48
Object out for delivery to the recipient
10/07/2018
13:03
INDAIATUBA / SP
Object forwarded
Treatment Unit in INDAIATUBA / SP for distribution in Unit REMOVED / SP
07/07/2018
14:00
CAJAMAR / SP
Object forwarded
Treatment Unit in CAJAMAR / SP for Treatment Unit in INDAIATUBA / SP
05/07/2018
17:42
CURITIBA / PR
Object forwarded
Distribution Unit in CURITIBA / PR for treatment plant in CAJAMAR / SP
05/07/2018
17:40
Customs supervision terminated
Visit My environment Imports
04/07/2018
08:20
Object received by the post Office of Brazil
14/06/2018
17:16
SWEDEN /
Object forwarded
from country to SWEDEN / para País em BRASIL / BR
14/06/2018
16:11
Object received in export unit
14/06/2018
15:38
Object posted

Table-Summary

Por fim, This is the table-summary of purchase:

Product Name: BSIDE ESR02 Pro
Name Original: BSIDE Digital Transistor Tester ESR02PRO SMD Components Diode Triode Resistance Inductance Capacitance Multimeter ESR Meter
Store: AliExpress, shop: BSIDE TRADE HONGKONG CO., LTD Store
Value: US$ 26,87
Current value: US$ 24,08
Payment Method: Credit Card Visa International
Shipping Type: Aliexpress Standard Shipping
Shipping Fee: Free
Package Home Country: China
Purchase Data: 10/06/2018
Submission Date: 11/06/2018
Data Delivery: 11/07/2018
Time in Transit: 30 days
Declared content: Capacitance M
Type Marked Content: Others
Declared Value: USD 12.00
Taxed: Not
Taxable Value: -
Tax Value: -

Final Considerations

The BSIDE ESR02 Pro is easy to use and delivers all the necessary information on the LCD display at once, dispensing more complicated tests with the help of multimeter. Capacitors and transistors can be tested easily. Is a product well done and with many possibilities, especially the terminals for probes and testing of SMD components, that are not available in cheaper models.

Since the arrival of BSIDE ESR02 Pro Fortunately I didn't have to fix anything in that it was necessary. But anyway I'm glad to have you on my team for testing equipment and electronic repairs, because these days is increasingly difficult to find people who actually fix electronics. A maioria das assistências técnicas se limitam a trocar placas, o que em muitos casos acaba custando o preço de um equipamento novo.

Share this article with your friends if you liked 😉 . If you also want to shop in AliExpress, directly from Hong Kong, click here and good shopping.

0 0 vote
Article Rating

Permanent link to this article: https://www.skooterblog.com/2018/10/06/review-bside-esr02-pro-testador-de-transistores-capacitores-etc-aliexpress/

Sign up
Notify about
guest
1 Comment
older
more new top rated
Inline Feedbacks
See all reviews

[…] veio meu primeiro vacilo. Resolvi testar os capacitores na própria placa com o BSIDE ESR02 Pro, even though the test card is not reliable as there is influence of other components. The […]

×
1
0
We would like to know what you think, Leave your commentx
()
x
Enable Notifications    Ok No thanks