OSSC Firmware v0.83 e Analogue Mega Sg Firmware 4.5

today launched the final version of the v0.83 firmware for the OSSC, according to information from its creator, of marqs, on the forum da VGP.

The new features are listed below:

* Scanline updates and fixes
** Overlay pattern customization feature
** Fixed non-alternating mode with line4x interlace sources
** Added half-interval option for pre-linedoubled sources

* Adv. timing option updates
** Sampling phase made mode-specific
** Horizontal samplerate fine-tune option for optimized modes

* Video and audio TX parameters tweaked
** Set optimal video clock level
** Disable audio copyright flag
** YCbCr444 TX mode added

* Auto YPbPr CSC option added
* Fixed profile load not reading data from last mode presets
* Enabled 35MHz video LPF for 720p & 1080i in auto mode

The download of the new firmware can be done here and the instructions to update it are in wiki.

I upgrade later, and then confirm that the OSSC Chinese accepts updates (or not).

Another novelty of the day is the official firmware to v4.5 Analogue Mega Sg.

The news is:

– Player 2 controller can run the menu if it is a 3 or 6 button controller, and player 1 controller is not a 3 or 6 button controller.
– Different size font files are supported. If the file is 1K or larger, the first 32 characters are cut off.
– DVI Mode was added.
– Fixed scaler bug where the top scanline or two might not be visible.
– Scanlines have been totally redone. There are now more options to tweak and width is now adjustable.

(gen/md)
– fixed CD games that regressed in previous fw
– Some graphic issues on Mickey Mania CD and others fixed.
– Fixed bugs with Japanese Sega CDs.
– Silpheed and Vay bugs fixed.
– Popful mail “CPU ERROR” fixed.
– CD bus timing improvements.
– Pier Solar cartridge + audio CD works and tested on US model 1, US model 2, and Japanese CD units.
– Added an option to automatically enable CD audio when CD unit plugged in.
– Fixed FM sound bug on Streets of Rage percussion on certain tracks.
– Fixed PSG sound bug (Phantasy Star IV).
– CRAM dots option added.
– X-Men 2 random character select on start is now random.

(sms)
– SMS Cropping setting added to crop the left side when a game used left cut.
– Fixed PSG sound bug (Alex Kidd in Miracle World).
– CRAM dots option added.
– VDP palette option added to select SMS or original TMS9918a palette for video modes 0-3.
– All 240 scanlines are now visible. Before, only 239 were visible.

The download can be done in site da Analogue. In this case I'll wait for version jailbreak due out soon and then upgrade.

Check out the reviews of the OSSC and the Analogue Mega Sg aqui no Skooter Blog, by clicking on the respective links.

Update: the v0.83 firmware was installed on my OSSC with success.

OSSC fw. 0.83a

OSSC fw. 0.83a

0 0 vote
Article Rating

Permanent link to this article: https://www.skooterblog.com/2019/06/10/ossc-firmware-v0-83-e-analogue-mega-sg-firmware-4-5/

Sign up
Notify about
guest
4 Comments
older
more new top rated
Inline Feedbacks
See all reviews

Good morning! I also have a OSSC, and updated to 0.83 also, but I have a doubt, I updated using ossc_0.83-aud.bin and ossc_0.83.bin .
Just not updated using the ossc_0.83-jp.bin and ossc_0.83-aud_jp.bin ?
Do you think these are also needed in jp?

Got it! Thanks for the tip! I updated first with the ossc_083.bin and when tested my mega drive, he tava no audio! Then I thought I had done shit kkkkkkk
Then I put the ossc_083-aud.bin and everything worked! One thing I noticed is that the SNES is the most problematic compatibility, the LG tv's super nintendo runs on all settings, from passthru to 5x
I got a samsung tv 4k and my snes only ran in settings 2 and 3 times, when I put the other gives no sign.

Cristian

Updated to 0.83 with success but after the update, the remote stopped working.
To fix this, just hold the second button when powering on the OSSC and re-learn all the buttons

×
4
0
We would like to know what you think, Leave your commentx
()
x
Enable Notifications    Ok No thanks