jul 29 2019
The Kapton tape 20mmx40m High Temperature resistant to high temperatures, as the name says, and it is used to protect electronic circuits for removing components. For example, removing a hot air component with a solder and rework station as Yaxun 702, It is good to protect with Kapton tape to the components …
Permanent link to this article: https://www.skooterblog.com/2019/07/29/fita-kapton-20mmx40m-alta-temperatura/
jun 27 2019
Chip TIA Atari 2600 It is known by several names, as CO10444, CO104444D, KSC131, UM6526, UM6526N, and other. It was purchased for use in one of my Atari 2600, which occupies the main post, in the living room TV. He was acquired because this Atari 2600 I was not working with paddles at the entrance to the left controls. After …
Permanent link to this article: https://www.skooterblog.com/2019/06/27/review-chip-tia-atari-2600-co10444-ksc131-um6526/
jun 25 2019
Capacitor Metallized Polyester of the 68nF and 100V are used in Atari 2600, specifically in the scan lines of the paddles. They're used 4 their, one for each paddle. They were purchased because one of my Atari 2600 I was not working with paddles at the entrance to the left controls, and I suspected that might be the …
Permanent link to this article: https://www.skooterblog.com/2019/06/25/review-capacitor-poliester-metalizado-68nf-100v-lote-de-100-pecas-mercado-livre/
May 31 2019
Guide The clincher Irwin Professional R250 is a hinged tool which serves mainly for joining two or more materials through rivets fountain safely and effectively, may use steel rivets, aluminum or mixed. These are the product characteristics, according to the Irwin site: Riveter produced with aluminum alloy …
Permanent link to this article: https://www.skooterblog.com/2019/05/31/review-rebitador-manual-profissional-irwin-r250/
May 18 2019
The Battery Charger 12V Charger PR10 Expert is an intelligent automatic charger with float function and reactivator. Fits or sealed lead acid batteries gel 12 volt 3Ah to 200Ah. He charges the vehicle battery by connecting the claws to the battery and pressing the ON button. According to the instructions, is not …
Permanent link to this article: https://www.skooterblog.com/2019/05/18/review-carregador-de-baterias-12v-expert-charger-pr10/
February 28 2019
O Conector Wago Borne 3 Wires – Kit With 10 parts allows splice junction wired fast and uncomplicated, even when the wires are of different gauges. There are models for different amounts of wires and different currents. I chose the model 32A, 250V e 4KV. I used two of them to make the amendment …
Permanent link to this article: https://www.skooterblog.com/2019/02/28/review-conector-wago-borne-3-fios-kit-com-10-pecas/
February 27 2019
The Line Filter 2 Taken – Plug-in Model – No cable has a switch and a fuse. The plug is only 2 pins, so that 2 it takes, while having the center pin, They are not grounded. Check out the photos and video: These are the trace information …
Permanent link to this article: https://www.skooterblog.com/2019/02/27/review-filtro-de-linha-2-tomadas-modelo-plug-in-sem-cabo/
February 12 2019
In this article I present a professional with 10 Mixed Outlets, as he is called by your seller. He has 5 taken at the Brazilian standard and 5 taken at American standard, all grounded. Motivation Who monitors the Skooter Blog know that I have some old video game consoles, which are all connected …
Permanent link to this article: https://www.skooterblog.com/2019/02/12/review-filtro-de-linha-profissional-extensao-regua-10-tomadas-mistas/
February 06 2019
The pair of Handles (Frame) for Goal, Voyage, and Saveiro G5 – Graphite was acquired to replace the pair of original knobs in a Gol G5, because one of them was broken. Local trade the cost was approximately R$ 60,00 for parts, parallel also, and about R$ 90 for labour …
Permanent link to this article: https://www.skooterblog.com/2019/02/06/review-par-de-puxadores-moldura-de-porta-para-gol-voyage-e-saveiro-g5-grafite/
jan 21 2019
The Socket Adapter W/Switch / 4 Taken 2 p + T has a format with three outlets in the front and one at the bottom. The switch has an LED to indicate the operation. The outlets are 2 p + T 10A. Is manufactured in China and imported by Chy Eletromax Comercio LTDA. The tag is Xtrad …
Permanent link to this article: https://www.skooterblog.com/2019/01/21/review-adaptador-de-tomada-c-interruptor-4-tomadas-2pt-5pcs/
![[Review] Xiaomi Mi Smart Scale 2 - Smart Balance](https://i0.wp.com/www.skooterblog.com/wp-content/uploads/2018/01/IMG_8866.jpg?fit=1200%2C900&ssl=1&resize=40%2C40){kind=small}
![[Review] Super Nintendo Original NTSC PCB SHVC-CPU-01 CPU/PPU1/PPU2 2/1/3](https://i2.wp.com/www.skooterblog.com/wp-content/uploads/2019/09/IMG_4362.jpg?fit=1200%2C900&ssl=1&resize=40%2C40){kind=small}
