Archive by tag: MiSTer

[Review] MiSTer's Official Case, Audio Tape Input Board e In-Line Power Switch – Mister Addons via Direct Shipments – Building a Mystery – Part 4

MiSTer finally assembled in its official case: upside.

The MiSTer Official Case, a Audio Tape Input Board (ADC In) and In-Line Power Switch were acquired at MiSTer Addons and redirected to Brazil through Envios Diretos, this is the thirteenth time that I use the company's services. Package arrived tax free. I've already shown my MiSTer FPGA and …

Continue reading

Permanent link to this article: https://www.skooterblog.com/2020/08/19/review-case-oficial-do-mister-audio-tape-input-board-e-in-line-power-switch-mister-addons-via-envios-diretos-construindo-um-mister-parte-4/

[Review] 128MB SDRAM module for MiSTer FPGA – AliExpress – Building a Mystery – Part 3

128MB SDRAM module for MiSTer FPGA.

The 128MB SDRAM Module for MiSTer FPGA was purchased on AliExpress, LICHIFIT-Z6H Electrics Store for use on my MiSTer FPGA, that I have already shown in the first two parts of this series of articles: Building a MiSTer - Part 1: Terasic DE10-Nano and IO Board w / Noctua NF-A4X10-FLX 5V - via MiSTer USB Direct Shipments …

Continue reading

Permanent link to this article: https://www.skooterblog.com/2020/06/07/review-modulo-sdram-de-128mb-para-o-mister-fpga-aliexpress-construindo-um-mister-parte-3/

[Review] MiSTer USB Hub – MiSTer Add-ons via Direct Shipments – Building a Mystery – Part 2

O Hub USB do MiSTer.

The MiSTer USB Hub was purchased for my MiSTer FPGA, that I already presented in the first part of this series. The purchase was made at MiSTer Add-ons, and redirected to Brazil by Envios Diretos, this is the eleventh time I use the company's services. Package arrived tax free. Motivation I started my MiSTer with just …

Continue reading

Permanent link to this article: https://www.skooterblog.com/2020/04/16/review-mister-usb-hub-mister-add-ons-via-envios-diretos-construindo-um-mister-parte-2/

MiSTer FPGA: Core do Atari 2600 updated! And a bit of latency.

Tapper - Atari 2600 - no MiSTer FPGA.

The Atari 2600 It has always been one of my favorite video game consoles. It was my first contact with video games and the first one I had. When I set up my Mister, was already aware that the core Atari 2600 still I had many problems, and no one was working on it. It was not yet at the point of …

Continue reading

Permanent link to this article: https://www.skooterblog.com/2020/03/31/mister-fpga-core-do-atari-2600-atualizado-e-um-pouco-sobre-latencia/

[Review] microSD Sandisk Ultra 512GB card for Mister – AliExpress

Sandisk Ultra microSD card 512GB, on its packaging.

The microSD card Sandisk Ultra 512GB was acquired on AliExpress, Shop Bo Cheng Store, to use in my Mister. Motivation DE10Nano, main board of the Mister, comes with a card microSD, but it has only 8GB, which is insufficient to place the games collections of various consoles and arcades I'm interested. …

Continue reading

Permanent link to this article: https://www.skooterblog.com/2020/03/28/review-cartao-microsd-sandisk-ultra-512gb-para-o-mister-aliexpress/

[Review] Mini Adaptador USB Bluetooth v4.0 CSR Dongle – USBVID_0A12&PID_0001&REV_8891 – for Mister – AliExpress

Mini Adaptador USB Bluetooth v4.0 CSR Dongle.

The Mini Bluetooth USB Adapter Dongle v4.0 CSR was acquired on AliExpress, store Asunflower Store, for use with my mister FPGA. The hardware ID of it's USB VID_0A12&PID_0001&REV_8891. Contrary to what happened with the Bluetooth dongle I bought in Brazil, this Mini Bluetooth USB Adapter Dongle v4.0 CSR worked perfectly with the three …

Continue reading

Permanent link to this article: https://www.skooterblog.com/2020/03/24/review-mini-adaptador-usb-bluetooth-v4-0-csr-dongle-usbvid_0a12pid_0001rev_8891-para-o-mister-aliexpress/

Building a Mystery – Part 1: Terasic DE10-Nano e IO Board c/ Noctua NF-A4X10-FLX 5V – Shipping via Direct

Mister I assembled and ready to be tested.

Mister is an open project that recreates several video games, computers, FPGA and classic arcade, allowing you to use your games, softwares, original controllers and accessories, with TVs and modern hardware. In this article I show how I started building my Mister, initially only with the motherboard, Terasic to DE10 and Nano-IO board, with …

Continue reading

Permanent link to this article: https://www.skooterblog.com/2020/03/10/construindo-um-mister-parte-1-terasic-de10-nano-e-io-board-c-noctua-nf-a4x10-flx-5v-via-envios-diretos/

×
Enable Notifications    OK No thanks